Dolphin Net Base Guide de l'utilisateur télécharger pdf (Page 109)

12 - 7

Desk Mounting

The DIN Rail (7.5 X 35 mm) slot on the bottom panel enables secure mounting on a horizontal surface.

Hardware Required

• 3/16 in. dia x 5/8 in. long pan head screw

• 1/2 in. OD x 7/32 in. ID x 3/64 in. thick

• 3/16 in. dia nut

Installing the DIN Rail

1. Slide the DIN Rail into the DIN Rail slot on the bottom panel of the base.

2. Turn the base and DIN Rail right side up.

3. Then, using the appropriate nuts and bolts, secure the DIN Rail to a stable, flat horizontal surface.

Wall Mounting

The optional wall mount bracket enables secure mounting of the base on a vertical surface. The wall

mount bracket can be used in conjunction with the DIN rail but does not require the DIN Rail for use.

Hardware (Provided)

• M3 x 9 mm self-tapping screws, #2 Phillips, Qty. 4

• 3/8 in. x 4 in. round head toggle bolt, 2-5/8 in. usable length, Qty. 4

• 3/8 in. x 2 1/2 in. length Hex Head Lag Screw, Qty. 4

Tools Required

•Drill

• 7/8 in. Drill Bit (for hollow wall installations) or

1/4 in. Drill Bit (for wood stud installation)

• Phillips Screw Driver

DIN Rail (7.5 X 35 mm)

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 121 122

Pas de commentaire

Dolphin Net Base Guide de l'utilisateur Page 109